Universal I/O NIM Output UNIV-NIM

ImageThe UNIV-NIM Universal I/O module provides two NIM level output. Output specifications are following:

parameter value condition
connector type LEMO EPK.00.250.NTN
IOH -12 mA to -32 mA
50 ohm to ground
IOL 0 to -2 mA 50 ohm to ground

This module can be used with the VME-EVR-230, VME-EVR-230RF and the PXI-EVR-220.

Below is a scope screenshot of a NIM output pulse into 1.5 m of 50 ohm LEMO cable terminated to 50 ohms to ground inside scope.

Scope screenshot of NIM Output

Higher resolution picture.